Double stacks slot review

Stackableusb uses the initial specification usb 2.0, but defines the interface as a cabinet for the side. Using the same thought that pc104, without obsolete interfaces. Find out anywhere in the application of the pc-104 interface, proposed to show an example of the standard that folds the boards on one another. Stackableusb requires one single paid computer [sbc] as a host and also on 7-10 usb peripheral boards. About 5 peripheral boards are paced over sbc and, the longest five of the sbc below. The stacks of cards are able to be applied by them “i”, in autonomous or installed on a certain built -in main board [mother]. Most of all the board could have changed, it seems that this factor, the number was reduced by 8 common cards.

double stacks online for example, they are adjacent to the pc-104 stacks or epic main boards. The epic standard is an organic and unified paid computer [sbc], which acts as a pc-104 board card for stacks [and now stackablesb]. Sackablesb double stacks slot also indicates the usb-shares, therefore they consume much smaller area of the board than the initial pc-104 or pc-104 standards. Reducing the amount of space required by interface connectors means more than the payment area for elements and durability. 

The formal factor of the board is defined as [pc-104] 3.775 inches x 3.550, but the interval between the board has changed. The stackableusb specification determines 0.591 inches between boards [15 mm], at the same hour as the pc-104 standard allowed 0.60 inches between cards. Of course, the connector style is completely different as the places. However, the mounting holes are placed in their place, which is similar to specifications, so this new standard is used on epib boards, as indicated above. So, the specification refers to the electrical standard, described mostly the usb standard, does not include it. The stackableusb specification covers the architecture, payment format, the size of the connector and the location, but also the distribution between the boards. So, stackablesb is more like a mechanical standard that uses the usb standard to equip electrical data and protocol. 

The main separation of the usb interface description. 

specification of the tire, revision 2.0, april 2000 specification of stackableusb, revision xx, 2006 see double 26-pin rows, male/female, superficial fastening 15.24 mm stack height for loading and unloading the upper and lower boards 

Related products 

Samtec 15.24 mm stanfoff 

Note editor; their creativity is not the same case that two usb-strings folded one for the other, the other wise, which we know as a double glass connector. The double glass connector is only two or three usb separately united connectors together, and never have any resemblance to the stackable-usb interface.